Thursday, June 27, 2013

Where is the Water Shut-Off? (Quick. This is a quiz.)

One of the most important things you can do when it comes to home maintenance is to prepare for a possible plumbing emergency by locating and identifying all the water shut-offs for the house - before a problem arises.
Take the time to take the tour. Armed with a flashlight, masking tape and a magic marker go through the house with anyone who may also have a need to know and identify and mark the main valves. Test them while you're at it to make sure they turn on and off easily without developing a leak. Then you'll be ready (knock on wood) should a pipe spring a leak.

First stop: main water shut-off. The main water shut-off is usually on the pipe as it exits the house on the street side - or under the house in the basement or crawl space. Go ahead and label it "MAIN H2O."

Next stop: water heater. If you do turn off the main valve, a gas hot water tank must be turned down as low as possible. Yours might have a "vacation" setting on the face of the tank. If so, go ahead and set it to vacation. An electric hot water tank can be shut off at the electrical panel. Label it on the panel to help locate the correct switch in a panic. If you have a hot water heating system, check that the boiler has enough water in it to keep from running dry.

Then head for to the kitchen, where you'll want to identify the hot and cold water shut-offs under the sink. Bathrooms also have valves for the sink, as well as the toilet. Look under the fixtures for them. Then there will be a shut-off for the tub/shower, perhaps in a closet on the other side of the wall or possibly under the house or in the basement.

Make sure you label the valves for the washing machine, dishwasher, ice maker, water softener, hot tub - or any other fixture with a water supply. You might be surprised how many there are once you start. Just as long as you're not surprised in an emergency...

When all else fails or time is of the essence, just head for the main shut-off for the house. Hopefully it's easy enough to get to - and you know just where it is.

Questions? Don't hesitate to call us here at Boden Plumbing (707 996 8683) or send an e-mail if you prefer. We're glad to help.

Thursday, June 20, 2013

Gray Water Systems for Sonoma

Gray water systems can be as simple as a rain barrel collecting and saving roof runoff or as complex as a system plumbed to code that separates out bath, sink and shower water for outdoor landscaping. As varied as they are, all gray water systems have one thing in common: they are designed for more efficient use of potable water.

California's Health and Safety Code, Section 17922.12, defines graywater as “untreated wastewater that has not been contaminated by any toilet discharge, has not been affected by infectious contaminated or unhealthy bodily wastes, and does not present a threat from contamination by unhealthful processing, manufacturing, or operation wastes. 'Graywater' includes but is not limited to wastewater from bathtubs, showers, bathroom washbasins, clothes washing machines, and laundry tub". It does not include wastewater from kitchen sinks or dishwashers.

The average family of four produces more than 38,000 gallons of gray water per year, according to John Russell, a landscape contractor and owner of WaterSprout, an Oakland design-build company focusing on gray water and rainwater catchment systems. (See gray water article in San Jose Mercury News.)

That's a significant amount of water, and considering how much summer water use goes to outdoor irrigation, the potential for reducing overall water consumption by reusing gray water to water lawns and other landscaping is equally significant.

Fortunately, Sonoma County recently implemented changes making it easier to legally install gray water systems in the County. The three types of graywater systems currently allowed in Sonoma County are:
1) Clothes washer system (single connection only)
2) Simple system (less than 250 gallons per day)
3) Complex system (more than 250 gallons per day)

BENEFITS of HOME GRAY WATER SYSTEMS

:: Reduces your potable water use up to 40%
:: Reduces your water bill
:: Reduces the County’s energy consumption when less water needs to be processes and transported
:: Reduces demand on Russian River and groundwater sources
:: Helps protect water resources for future generations

THINGS TO CONSIDER

:: Graywater may contain pathogens
although researchers have found no documented cases:: Systems that pond may provide breeding grounds for mosquitos
ponding is avoided with proper mulch basins:: Salt accumulation may inhibit plant growth
use biodegradable soaps exclusively:: Unfiltered systems accumulate solids and may clog system
be careful what you send down the drain or include a filter in your system:: Minimal contact with graywater is recommended
water is diverted outside and underground
gray water is not permitted for use on above ground veggies or root crops
:: When ground is saturated, graywater must be diverted to site’s sewer disposal
simply switch your system off during the winter rainy season

INTERESTED IN HAVING A GRAY WATER SYSTEM AT YOUR HOUSE? FOLLOW THESE BASIC STEPS*:

1) Educate yourself on the design, installation, and maintenance requirements for a graywater system
2) Design your system or hire a licensed designer/contractor to design your system
3) If required, submit appropriate permit(s) and plan(s) to the local enforcement agency (see contact details listed below)
4) Install your system, obtain required inspection(s), and final permit
5) Maintain your system

*excerpted from Sonoma County's gray water systems brochure



For more information about gray water and Sonoma County, visit the Sonoma County Water Agency's web site at www.scwa.ca.gov/graywater

For more information about installing a gray water system at your home or business:
Unincorporated areas of Sonoma County: Visit PRMD on the web
City of Sonoma: Call 707-938-3681
City of Petaluma: Call 707-778-4301

Interested in reading more about gray water systems in the Bay Area?
See: Gray water systems growing in popularity, ingenuity and ease of installation, in the San Jose Mercury News

photos: Vianney Soto on flickr.com

Thursday, June 13, 2013

Got Questions about the Sonoma County Direct Install Program?


The Sonoma County Water Agency has recently expanded the Direct Install Program to include single-family homes. Woo hoo!!

That means if you are on municipal sewer and you have a toilet that uses more than 1.6 gallons per flush, you are eligible to have Boden Plumbing (or any other plumber participating in the program) install a new low flow toilet for you - at no charge. The County water agency pays the plumber directly for the toilet, seat, angle stop and the cost of installation. Good deal for you for sure. Plus, there is no limit on the number of toilets we can replace for you - they just all have to be clunkers.

It is important to mention that if there are any associated repairs necessary in changing out your toilet -- say we find a damaged floor, for instance -- you would be responsible for those additional costs. In our experience, these instances have been quite rare.

Also, we offer certain toilets under the Direct Install Program. If you decide you prefer something else, upgrade charges may apply. (We guarantee allthe toilets we install, so don't worry that the toilets we're installing under the Direct Install Program are not up to our usual standards. It's just that you might choose something different.)

Our process is to schedule a site visit to determine your eligibility and to evaluate what type of toilet will work for you. Then we can schedule your new toilet install.

And your old toilet will be pushing up daisies - or petunias.

***

Got questions? Call us here at the office (707 996 8683) or visit Sonoma County Water Agency Direct Install Program on the web. The answers are out there.

Related Posts Plugin for WordPress, Blogger...